Fancy your hand at treasure hunting? Are you a wanna-be detectorist?
Borrow the Garrett ACE 300i to try your hand at this growing hobby!
There are 5 modes that can be used in the Garrett ACE 300i these are as follows:
Jewellery – Optimised for jewellery type items like necklaces and rings. This mode will ignore most iron trash.
Relics – Optimised for targets in the lower conductivity scale, items like lead, bronze and brass. It should also help with the elimination of small iron pieces like nails.
Coins – Optimised for coins and eliminating iron foil and nails. Be careful with this mode though as you may miss hammered coins.
Zero Disc – The zero disc mode means zero discrimination or in other terms all metal. The Ace 300i in this mode will detect anything metallic that is in the ground.
Custom – The custom mode allows the operator to select the settings they require ie eliminate parts of the numeric scale and discriminate or set the sensitivity, it then can be saved for later use even when the metal detector has been switched off. Saving you time setting up again.
- Silverline MicroShovel
- Control Housing with S-Shaped Stem -Hand Held
- Search Coil with protective cover
- Upper, lower stem connected with washers
- Headphones
- Garrett Pro-Pointer II
- Cover-Up for Control Unit
- Manual
If you wish to metal-detect on land which is not your own, you must get permission from the landowner before you do so. If you metal-detect on land without consent, you may be charged with a criminal offence and you could be sued for damages. Read about responsible metal detecting in our blog post.